12 mm fibreglass tube for the jib strut, Hansa
Hansa · Ref. HAN-4463.1 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4463.1 is already in the message.
Description
This part works at the bow, next to the jib of a Hansa. When it's time to replace it, it arrives ready at the required length. This way you save measuring and sawing off excess length, and reduce the risk of a poorly made cut.
The material is FRP, the composition the manufacturer uses for this reference within its range of pre-cut spare parts. When replacing it, it is advisable to keep that same composition and not switch to a different one without checking first.
As basic care, inspect it visually before every day sail. If you see cracks, splinters or deformations, it is time to replace it. After sailing, rinse it with fresh water and let it dry.
At Proasail.com, the official Hansa distributor, we answer your questions about whether it fits your model before you order it.
Compatibility
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | One 12 mm FRP tube section, cut to length. |
|---|---|
| Sold as | Sold by the length. |
| Manufacturer reference | 4463.1 |
| Brand | Hansa |
| Material | FRP (fibreglass) |
| Diameter | 12 mm |
| Format | tube cut to length |
Frequently asked questions
What diameter is the tube?
It is a 12 mm tube, reference 4463.1.
Is it cut to length?
Yes. It is a cut-to-length FRP tube, ready to use as a jib strut.
Does it fit any Hansa?
The part is designed for the jib strut of Hansa boats. If you're unsure about your model, write to us at Proasail.com and we'll check it with you.
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Ref. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
-
Hansa · Ref. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









