5 x 15mm clevis pin with split ring (pack of 2)
RS Sailing · Part no. ST-O0515 · Proasail.com, official RS Sailing distributor
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference ST-O0515 is already in the message.
Description
Joins a fitting or rigging terminal to its attachment point; the split ring keeps the pin in place. It is used at the mast step, the shroud attachment, the boom and the GNAV attachment points.
Nominal size: 5 x 15mm.
Standard fitting (5 x 15mm) used on several RS models (RS 100, RS 2000, RS 400, RS 500, RS 600, RS Cat 16, RS Toura, RS Vareo, RS Venture, RS Vision).
Fitting and use
On RS boats it is used at the mast step, the shroud attachment, the boom and the GNAV vang attachments. The split ring stops it coming out.
Compatibility
Listed in the parts diagrams of 8 boats. Also compatible with RS 400 and RS Toura.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | The clevis pin and its split ring. |
|---|---|
| Sold as | Sold in packs of 2. |
| Technical data | Reference ST-O0515, RS-range part. Nominal size 5 × 15 mm. |
Frequently asked questions
Does it appear in more diagram sections than the product page lists?
Yes. On the RS Venture it also appears under “Spars: lower mast” and in the hull crew area (S, SE and Connect versions); on the RS Vision, also in the boom and GNAV kicker attachment area. Check the parts diagram for your boat.
Does a loose split ring appear next to this pin in any parts diagram?
Yes, on the RS Venture: under “Spars: lower mast” and “Hull: crew area · Venture Connect” the 1 × 11 mm split ring (ST-U1011) also appears, as a separate reference. Compare it with yours.
Which other clevis pins appear in the same sections?
In the RS Cat 16 “Striker bar and spinnaker pole”, the 5 × 25 mm (ST-O0525) and 6 × 20 mm (ST-O0620) pins and the striker bar clevis pin (C16-HF-102); in the RS 100 “Spars: mast”, the 5 × 10 mm one (ST-O0510); in the RS Toura “Spars: boom”, the Selden 5 × 34 mm (165-603). Compare the size with the pin you are replacing.
Recommended products
More parts for this boat and similar parts
-
-
-
-
-
-
-
-
RS Sailing · Part no. RS1-HF-402
RS 100 hiking/toe strap multi-point fix plates
On order€10.73 €8.87 -
RS Sailing · Part no. 025-025-20BLK
Seldén GNAV strut assembly, black (tube, ends and toggle)
On order€306.17 €253.03 -
RS Sailing · Part no. 025-025-20SIL
Seldén GNAV strut assembly, silver (tube, ends and toggle)
On order€175.66 €145.17









