6-way Molex-type connector, female, with pins
Hansa · Part no. HAN-6762.61 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-6762.61 is already in the message.
Description
On board, a cable joint usually fails due to humidity, vibration or a loose contact. That is why it is worth choosing each end of the line carefully and working calmly, ashore and with the power off.
This unit is the female end of a six-way connector. It is sold per unit, so check whether you also need the male end that mates with it. Before ordering, look at the end you want to replace and count the ways: they must match.
If the material of the casing or the contacts matters to you, ask us.
In use, check from time to time that the connection remains firm, clean and dry. Salt or verdigris on a contact causes intermittent cuts and odd readings. If you are unsure whether it fits your installation, write to us at Proasail.com with your boat model and we will check it with you.
Compatibility
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| Part type | Adaptive sailing: servo & access |
|---|
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









