8 mm rudder box pin, SKUD 18
Hansa · Part no. HAN-3493 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-3493 is already in the message.
Description
This part works in the steering area. When you sail, the loads on the rudder blade are concentrated there, and any play or wear shows up immediately in your course. That is why it is worth keeping it in good condition at all times rather than waiting for it to fail in the middle of your day on the water.
Only one unit is supplied per purchase, and the diameter given in the technical sheet is the key figure for it to fit properly in its housing. If the fit is not right, the assembly may end up loose.
As general care, check the condition of the assembly before and after every day sail. Rinse with fresh water if you have sailed in salty conditions, and replace the part as soon as you notice play, deformation or signs of wear.
If you race, keep in mind that equivalents from other brands depend on what the class rules establish. The class rules decide what may be fitted in competition. If in doubt, write to us and we will check it with you.
Compatibility
Listed in the Hansa SKUD 18 parts diagram.
Hansa spare part for the SKUD 18 rudder box.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One 8 mm pin. |
|---|---|
| Sold as | Sold individually. |
| Diameter | 8 mm |
| Application | SKUD 18 rudder box |
| Manufacturer | Hansa |
| Proasail.com reference | HAN-3493 |
Frequently asked questions
What diameter is this pin?
It has a diameter of 8 mm.
Which boat is it for?
It is a Hansa spare part for the SKUD 18 rudder box.
Can I fit a pin from another brand for racing?
For racing, check your class rules. Write to us with your boat model at Proasail.com and we will confirm it before you order.
Recommended products
More parts for this boat and similar parts
-
-
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-
-
-
-
-
-
-
Hansa · Part no. HAN-4194.2
MkII lower shrouds, Access version, with adjusters, pair, SKUD 18
On order€317.02 €262.00









