Aluminium tube, 25.4 mm diameter, full length, Hansa
Hansa · Part no. HAN-4306 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4306 is already in the message.
Description
This item comes uncut, so you decide the final length. It is a good base when you need to build a custom part or replace a damaged one on board. You mark, cut and fit it to your setup.
In the water, parts of this type work every day: they are handled by hand, withstand the stresses of manoeuvring and get splashed. That is why it is advisable to measure carefully before cutting and to check that the diameter fits the fittings and bushings you plan to use.
If your use requires a specific strength, consult us before ordering and we will help you assess it.
As basic care, after sailing rinse the piece with fresh water and check that it has no dents or marks. A small defect caught in time avoids surprises when the boat is at sea.
Fitting and use
Use: inner tube for bow mast
Use: booms
Use: control levers (joysticks)
Use: other similar tubular parts
Compatibility
Uses: inner tube for a bow mast, booms and control levers (joysticks).
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | One 25.4 mm diameter aluminum tube in full length. |
|---|---|
| Sold as | Sold per unit: one tube in full length. |
| Brand | Hansa |
| Manufacturer reference | 4306 |
| Material | aluminum |
| Diameter | 25.4 mm |
| Format | full length |
Frequently asked questions
What is the tube's diameter?
The diameter is 25.4 mm.
Is it supplied cut to size?
No. It is supplied in full length, i.e. uncut. If you need a specific length, you will have to cut it yourself.
Is it suitable for the boom or bow mast of my boat?
It is for booms, inner tube for bow masts and control levers. Ask us about yours before ordering.
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









