C Crane for flush mounting, 450 mm shaft, with fall arrestor
Hansa · Part no. HAN-5311 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-5311 is already in the message.
Description
It is mainly used on pontoons, piers and floating docks. It helps people with mobility difficulties step from the pontoon onto the boat. It also lifts and lowers a heavy centreboard. The manufacturer also recommends it for small boats, outboard motors and anchors. Always respect the winch's limit.
The crane fits into a bush recessed below deck level. When it is not in use, nobody trips over it. The winch is a drum type with a brake and is tested to ISO/DIS 10535. The height it reaches depends on the rope you rig, up to 3 metres. On a floating pontoon this height barely changes. On a fixed pier with tides it varies throughout the day, so calculate for the most demanding case.
The whole assembly is made of a non-rusting metal, which is essential for a part that lives next to water and bears weight.
If you are going to move people, the standard requires a secondary brake between the crane and the spreader bar, in case the main system fails. This reference includes it. Before each use, check that its webbing is long enough for the lifting height and inspect the condition of the rope.
Fitting and use
Mounting: davit in a bush sunk below walkway level (flush version)
Lifting: up to 3 m, depending on rope length
Personnel transfer: fall arrester mandatory between davit and spreader bar
Lifting height: constant on a floating pontoon; variable on a fixed pier with tides
Compatibility
It is installed on pontoons, piers and fixed pontoons, and it is designed for raising ballasted centreboards, small boats, outboard motors and anchors.
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | C Crane flush-mount crane, fall arrester, spreader bar and stainless steel winch. |
|---|---|
| Sold as | Sold per unit. |
| Material | Stainless steel |
| Mounting type | Flush, in a bush below walkway level |
| Axle | 450 mm |
| Winch | Drum type, with brake |
| Safe working load (SWL) | 120 kg |
| Maximum lift | Up to 3 m, depending on rope length |
| Test standard | ISO/DIS 10535 |
| Includes | Fall arrester, spreader bar and stainless steel winch |
Frequently asked questions
Can it raise a ballasted centreboard?
Yes. It is also designed to lift and lower ballasted centreboards on the boat. Always respect the 120 kg safe working load limit.
Is a fall arrester needed to move a person?
Yes. The standard requires it as a secondary brake in case the main system fails. This model already includes it.
How high can it lift?
Up to 3 metres, depending on the length of rope fitted to the winch.
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









