Hansa · Part no. HAN-3421
Cockpit skirt with its hooks, Liberty
Hansa · Part no. HAN-4766 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4766 is already in the message.
Description
This piece is designed for windy, wavy days, when the water thrown up by the hull ends up inside the boat. It attaches to the edge of the hull and extends inward so that spray stays outside. This way, you sail with the helmsman's area drier.
The fastening makes the difference. The piece is kept taut along its entire perimeter. At the bow, two anchors attach to the boat. At the stern, two others, made of stainless steel, clip onto the rudder pin brackets. On the sides, flat pieces rest on the edge of the hull.
If it is new, it needs a set-up before going out: adjust the tension and properly position the flat pieces on the sides. Once done, it is fitted quickly and without tools. Before sailing, check that the tension is even and that each fastening is well seated.
Proasail.com, official Hansa distributor, also offers you the installation guide in PDF.
Fitting and use
Initial preparation: adjust the perimeter shock cord and properly position the aluminum side hooks
Tools: none needed once prepared
First: hook the two foredeck hooks
Then: pull the cord taut toward the stern and clip the two stainless steel hooks onto the rudder pin brackets
Finally: place the side hooks over the hull edge and adjust them
Compatibility
Which boats it fits
| Hansa Liberty | Fits, but it is not drawn in the parts diagram |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | Cockpit skirt with its hooks and the shock cord that surrounds it. Manufacturer reference: 4766. |
|---|---|
| Sold as | Sold per unit. |
| Manufacturer reference | 4766 |
| Manufacturer | Hansa |
| Boat model | Hansa Liberty |
| Bow hooks | 2 |
| Stern hooks | 2, stainless steel |
| Side hooks | flat aluminum |
| Perimeter fastening | shock cord |
Frequently asked questions
Do I need tools to fit it?
No. Once the skirt is prepared (cord adjusted and hooks in place), it is fitted easily and quickly without tools.
Do I need to adjust it before first use?
Yes. A new skirt requires adjusting the surrounding shock cord and correctly positioning the aluminum side hooks.
Where do I start fitting it?
First hook the two foredeck hooks. Then pull the cord taut toward the stern and clip the two stainless steel hooks onto the rudder pin brackets. Finally, adjust the side hooks.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
Hansa · Part no. HAN-6162.80
Liberty and 303S portable servo system: 80 rpm main and self-tacking jib
On order€4,178.13 €3,453.00 -
Hansa · Part no. HAN-6162.71
Liberty and 303S portable servo system: 70 rpm main and self-tacking jib, no battery
On order€3,079.45 €2,545.00 -
Hansa · Part no. HAN-6161.81
Liberty and 303S fixed servo system: 80 rpm main and self-tacking jib, no battery
On order€3,944.60 €3,260.00 -
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00









