Wētā Float Port Hull Grey
Part no. 10400GRY-P
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 10400GRY-P is already in the message.
Description
Its original name is “Wētā Float Port Hull Grey” and its code is 10400GRY-P. The Weta is a trimaran with two floats, one on each side of the main hull: this part is the left-hand one, looking forward, and it belongs to the “Hulls” group.
The last letter of the code shows the side: P for Port. For the opposite side (Starboard) there is the code 10400GRY-S. Check that letter when ordering and order only the side you need to replace.
For racing, the draft international class rules state that hull, beams and floats are supplied by Weta Marine or its licensees, and that their shape may not be altered. As it is still a draft, confirm with your class association which edition is in force.
Proasail.com, official distributor, supplies it with the manufacturer's code so you can identify it without errors.
Compatibility
Listed in the Weta parts diagram.
For the Weta, on the port side.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| Technical data | Part number 10400GRY-P, made by Weta Marine. |
|---|---|
| Section | Hulls. |
| Side | port. |
| Colour | grey. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Do I also need the starboard float?
They are sold separately: this part number ends in -P (port) and the starboard one in -S (10400GRY-S). Order only the side you are replacing.
What comes with the float?
The hull of the port float, in grey. Bow protectors, hatches and plugs are separate references.
How do I fit the float to the boat?
With the boat on its trolley, hold the float by the front elbow and the middle of the beam, and slide the aft beam in first; if it won't go in, it is misaligned: don't force it. Then tension the trampolines from the stern.
Can I use it on a racing Weta?
The draft international class rules require floats to come from Weta Marine or its licensees, and this part is from Weta Marine. As it is a draft, confirm the current edition with your class association.
Downloads
Recommended products
More parts for this boat and similar parts









