Foil Retaining Pin
WASZP · Part no. WZFRP · Proasail.com, official WASZP distributor
- Get it on Tuesday 24 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZFRP is already in the message.
Description
The Foil Retaining Pin is the pin that locks the WASZP front foil (the submerged wing that lifts the boat when foiling) and rear foil in position. It is the same part as reference M2FFRP. It appears in two assemblies: Front Foil Vertical Assembly, position 18, and Rudder Pin with Ring, position 4; quantity per boat: 1 in each assembly.
You will find position 18 in the Front Foil Vertical Assembly and position 4 in the Rudder Pin with Ring in the interactive exploded diagram.
Fitting and use
Works in the front vertical and in the rudder pin with ring.
Compatibility
Listed in the WASZP parts diagram.
Equivalent to part number M2FFRP: they are the same part.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| Technical data | Part number WZFRP (equivalent to M2FFRP), made by WASZP. |
|---|
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
Does the same pin work for the front and rear foil?
Yes. It pins both the front and the rear foil in place. The exploded diagram shows 1 in the Front Foil Vertical Assembly (position 18) and 1 in the Rudder Pin with Ring (position 4): check which one you are missing.
Is it the same as the Foil Front Locator Pin?
No. The Foil Front Locator Pin is a separate part, WZFFLP, in 316 stainless, at position 4 of the Front Foil Vertical Assembly. In that assembly this pin is at position 18.
What else is in the Rudder Pin with Ring assembly?
Position 1 is the Rudder pin (WZTRP). That pin also requires 1 M8 plastic washer (BO8WP) and 1 Ronstan Split Ring 14mm.
Downloads
Recommended products
More parts for this boat and similar parts









