Hansa · Ref. HAN-3421
Inner tube of the jib mast, Hansa 303
Hansa · Ref. HAN-4341.2 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4341.2 is already in the message.
Description
This part works at the front of the rig every time you go out sailing with your Hansa 303. A rig takes loads, knocks and salt spray on every day sail. That is why you should replace any unit you see bent, marked or with play.
We do know it is a tubular element with a defined section and wall thickness. Those two dimensions are what you must respect when replacing it.
After each day at sea, rinse it with fresh water and inspect it in good light. Look for dents, cracks or signs of wear. If you are unsure it is the one your boat needs, write to us at Proasail.com before deciding. Sold per unit.
Compatibility
Listed in the Hansa 303 parts diagram.
For the Hansa 303 (reference 4341.2).
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One inner tube for the bow mast. |
|---|---|
| Sold as | Sold per unit. |
| Manufacturer reference | 4341.2 |
| Boat model | Hansa 303 |
| Diameter | 25.4 mm |
| Wall thickness | 1.2 mm |
Frequently asked questions
What are the dimensions of the tube?
It is 25.4 mm in diameter and 1.2 mm wall thickness.
Which boat is it for?
It is the inner tube of the Hansa 303 bow mast, manufacturer reference 4341.2.
What material is it made of?
Contact us if you need that information.
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
-
-
-
-
-
-









