Jib halyard set, SKUD 18
Hansa · Part no. HAN-4592.2 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4592.2 is already in the message.
Description
On the water, the jib is hoisted before you start sailing and kept well tensioned throughout the day. These lines are designed for that task. One long piece takes care of the hoisting, a very short one completes that job, and a third, of intermediate length, is part of the system that tensions the sail.
All the pieces share the same diameter. This keeps the set consistent and saves you from mixing lines of different thickness. Also, since they come in the lengths, there is no need to cut by eye or improvise lengths. It is a good solution if you want to replace a worn line or redo the whole manoeuvre.
With use, the lines suffer abrasion and sun exposure. It is worth checking them from time to time, especially at the ends, and rinsing them with fresh water after sailing. If you see wear, replace them before they fail in the middle of a manoeuvre.
Offered by Proasail.com, official distributor. If you are going to race, compliance with the class is subject to the class rules.
Fitting and use
Use: SKUD 18 jib halyard
Function of each line: halyard (11 m), hoisting line (0.45 m) and tensioning-rig line (2.5 m)
Compatibility
Which boats it fits
| Hansa SKUD 18 | Fits, but it is not drawn in the parts diagram |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | Jib halyard 11 m (ref. 4592.21), hoisting line 0.45 m (ref. 4592.22) and tensioning-rig line 2.5 m (ref. 4592.23). All in 4 mm rope. |
|---|---|
| Sold as | Sold as a set. |
| Manufacturer reference | 4592.2 |
| Boat | SKUD 18 |
| Halyard length | 11 m |
| Hoisting line | 0.45 m |
| Tensioning-rig line | 2.5 m |
| Rope diameter | 4 mm |
Frequently asked questions
What is the length of the jib halyard?
The halyard measures 11 m. The set adds a 0.45 m hoisting line and a 2.5 m tensioning-rig line.
What does the set include?
The jib halyard, the hoisting line and the tensioning-rig line, all in 4 mm rope.
Does it work for boats other than the SKUD 18?
It is defined for the SKUD 18. For other models, write to us with your boat model at Proasail.com before ordering.
Recommended products
More parts for this boat and similar parts
-
-
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-
-
-
-
-
-
-
Hansa · Part no. HAN-4194.2
MkII lower shrouds, Access version, with adjusters, pair, SKUD 18
On order€317.02 €262.00









