Long keel locking pin, 420 mm, Hansa
Hansa · Part no. HAN-3501 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-3501 is already in the message.
Description
This part is fitted before casting off the mooring lines. It is passed through the handle until it slides into the console moulding. With that action, which takes a second, the keel is secured and does not shift once on the water.
Hansa stresses one safety point: you must not go out if the keel is not fully down. If it is not, there is a risk of capsizing and of the keel and crew shifting. For that reason, it is best to make it a habit, just like checking the rest of the rig before setting sail.
It is made of aluminium tube. Its tubular shape makes it easy to handle: it can be fitted and removed effortlessly when you put the boat away at the end of the day.
Before each outing, check that the pin goes through the handle and enters the console. You can find it at Proasail.com, the official Hansa distributor.
Fitting and use
Fitting: insert the pin through the keel handle and push it into the console moulding. Before sailing: the keel must be fully locked down. Safety: do not sail with the keel unlocked.
Compatibility
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | One long aluminium tube pin. |
|---|---|
| Sold as | Sold per unit |
| Length | 420 mm |
| Diameter | 12 mm |
| Material | aluminium tube |
| Function | locks the keel in the lowered position |
| Brand | Hansa |
| Size | 40 mm |
Frequently asked questions
What is this pin for?
It locks the keel down. It is inserted through the keel handle and enters the console moulding.
Can I sail without locking the keel?
No. If the keel is not fully locked, there is a risk of capsizing and of the keel and crew shifting.
What are its dimensions and material?
It is an aluminium tube 420 mm long and 12 mm in diameter.
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









