M3 SS316 Lock Nut
WASZP · Part no. BO3LN · Proasail.com, official WASZP distributor
- Get it on Tuesday 24 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference BO3LN is already in the message.
Description
Lock nut here means a nut with a nylon insert that stops it working loose. Sold individually.
In the Tiller Assembly with Extension it is position 4, with 2 in that assembly, and position 9, with 1 in that assembly. In the Tiller Mechanism Assembly it is position 5, with 2 in that assembly, and position 9, with 2 in that assembly. The same nut also appears in the Fasteners assembly (Bolts - Nuts). In addition, the exploded diagram lists it in the GPS Mount Assembly, position 7 (4 in that assembly).
You will find positions 4 and 9 of the Tiller Assembly with Extension and positions 5 and 9 of the Tiller Mechanism Assembly in the interactive exploded diagram.
Fitting and use
Fits on the rudder tiller, both on the tiller-with-extension assembly and on its mechanism.
Compatibility
Listed in the WASZP parts diagram.
For the WASZP: used on the tiller with extension, on the tiller mechanism and on the GPS mount (GPS Mount Assembly).
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| Sold as | Sold individually. |
|---|---|
| Technical data | Part number BO3LN, made by WASZP. M3 nut in 316 stainless steel with nylon insert. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
How many BO3LN do I need for each tiller assembly?
It depends on the position. The Tiller Assembly with Extension takes 2 at position 4 and 1 at position 9; the Tiller Mechanism Assembly takes 2 at position 5 and 2 at position 9. This part is also listed in the GPS Mount Assembly, position 7 (4 in that assembly). It is sold individually: order the ones for the positions you are replacing.
How many BO3LN does the Tiller Flex Joint need?
The Tiller Flex Joint (M2TFJ) requires 3 BO3LN nuts, together with 3 BO3x25RHP M3x25 mm bolts and 2 BO3W M3 washers. If you are replacing that joint, check you have all three references.
Is there an official video related to this part?
Yes: the product page links the official video "WASZP | V2 Rudder Assembly". To find the exact positions, use the Foils and rudder interactive exploded diagram, also linked from the product page.
Downloads
Recommended products
More parts for this boat and similar parts









