Main and jib sheet winches for the SKUD 18, 12 Ah battery
Hansa · Part no. HAN-6193 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-6193 is already in the message.
Description
This equipment is used while sailing to adjust the lines that control the two main sails. When tacking, heading up or changing course, you need to tighten and ease quickly, and that's when having some help is welcome.
It is a set designed for a specific class, so make sure you are clear on this before fitting it to your boat. Check what the regulations allow: under the class rules, each item is confirmed before going out on the water.
Since it runs on a battery, care starts on shore. Check that it is in good condition before every day sail and store it in a dry place afterwards. Rinsing the equipment with fresh water after sailing also helps it last longer.
If you are unsure between the two options in the set, write to us. At Proasail.com we will help you choose the one that best suits the way you sail.
Compatibility
Which boats it fits
| Hansa SKUD 18 | Fits, but it is not drawn in the parts diagram |
|---|
Not sure it fits your boat? Write to us.
Specifications
| Part type | Adaptive sailing: servo & access |
|---|---|
| Boats | Hansa SKUD 18 |
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
Hansa · Part no. HAN-2292
Complete cleat console, port and starboard, SKUD 18
On order€596.53 €493.00 -
Hansa · Part no. HAN-6196
Canting seat for the SKUD 18 with alloy frame
On order€1,989.24 €1,644.00 -
-
-
-
-









