Hansa · Part no. HAN-3421
MkII jib car, Hansa 303W
Hansa · Part no. HAN-2343.1 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-2343.1 is already in the message.
Description
This fitting slides along the track and holds the jib while you sail. It works under load on every tack, so it must fit the track your boat has. The current version has a wider base than the previous one, and that detail determines what you need.
If your sailing dinghy is older and has the previous model, that wider base means the track must be prepared. You have two options: widen the one you already have with tool ref. 2343.3 or replace it with the black aluminium track ref. 2343.2. Both are ordered separately. The fitting is sold per unit.
Before going out on the water, check that it runs along the track without play or jamming. Repeat that check from time to time, especially if you change the track.
If you race, check what is permitted under the class rules. And if you are unsure about your boat, at Proasail.com, official distributor, we will help you choose the right setup.
Fitting and use
Boats from no. 3164: it is the standard car
Earlier boats with MkI car: widen the track or replace it with track ref. 2343.2 (black aluminium)
Tool to widen the track: ref. 2343.3
Compatibility
Listed in the Hansa 303 parts diagram.
On earlier boats with the MkI car, the track must be widened (tool ref. 2343.3) or replaced with track ref. 2343.2.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One MkII jib car (ref. 2343.1). The track (ref. 2343.2) and the track-widening tool (ref. 2343.3) are sold separately. |
|---|---|
| Sold as | Sold per unit |
| Hansa reference | 2343.1 |
| Ronstan reference | RC91942 |
| Version | MkII |
| Base | wider than the MkI car |
| Standard from boat no. | 3164 |
| Boat model | Hansa 303W |
Frequently asked questions
Does this car suit my 303W if it is older than hull no. 3164?
It is the standard car from no. 3164 onwards. On earlier boats with the MkI car, its wider base requires widening the track or replacing it with track ref. 2343.2.
How do I widen the track I already have?
There is a tool for this, ref. 2343.3.
What Ronstan reference is it?
RC91942, the part Hansa now fits as standard.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
-
Hansa · Part no. HAN-5432.2
Bow support for the Shore shuttle trolley, Hansa 303
On order€85.91 €71.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-
Hansa · Part no. HAN-4726.3
Cockpit skirt hook (1 pc), Hansa 2.3, 303 and Liberty
On order€6.05 €5.00









