Nylon reefing drum for the jib mast
Hansa · Part no. HAN-4303 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4303 is already in the message.
Description
This unit is ordered when the original has been damaged. Before ordering it, check the manual for the Hansa 303 Wide. It describes that forward mast: no shrouds, 2.85 m long, with the component already built in. It helps you see where it goes and what space it takes up.
The assembly combines materials. The main body is nylon. Inside there is a 35 mm x 225 mm plastic bush and a 32 mm filler tube. If both are in good condition, reuse them. This way you avoid expenses that may not be necessary.
If you cannot reuse them, there are two options: an aluminium bush, part 4341.4, and a filler tube, part 4341.3. Note that the original bush is plastic and the replacement is aluminium. Both are ordered separately.
When preparing the order, check carefully what you may have salvaged from the damaged assembly. If you are unsure which part number you need, contact us before buying.
Fitting and use
Replacement: if the drum is damaged, recover the 35 mm x 225 mm plastic bushing and the 32 mm filler tube. If you cannot reuse the bushing: order the 4341.4 aluminium bushing. If you cannot reuse the tube: order the 4341.3 filler tube.
Compatibility
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | Nylon reefing drum. The 4341.4 aluminium bushing and the 4341.3 filler tube are separate part numbers. |
|---|---|
| Sold as | Sold per unit |
| Part number | 4303 |
| Manufacturer | Hansa Sailing Systems |
| Material | Nylon |
| Plastic bushing to recover | 35 mm x 225 mm |
| Filler tube to recover | 32 mm |
| Replacement aluminium bushing | 4341.4 |
| Replacement filler tube | 4341.3 |
Frequently asked questions
What should I keep when changing the drum?
The 35 mm x 225 mm plastic bushing and the 32 mm filler tube. If they are in good condition, they can be reused.
What should I order if I cannot reuse the bushing or the tube?
Order the 4341.4 aluminium bushing and the 4341.3 filler tube.
Downloads
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









