Preslite 40 rpm mainsheet winch motor
Hansa · Part no. HAN-6751 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-6751 is already in the message.
Description
On the water, the rope that controls the mainsail works under load almost constantly. It is most noticeable when tacking, when sheeting in with a fresh breeze, or when trimming the sail on each point of sail. That is why the drive for this equipment must always respond, and a failure usually shows up at the worst moment.
If the original drive fails, the sensible thing is to replace it in port rather than go sailing with a makeshift fix. Before fitting anything, check that the speed and reference stamped on your unit match those on this sheet. This helps you avoid returns and unnecessary testing.
For care and installation, follow the equipment manufacturer's instructions and, if in doubt, ask before working on it. A well-chosen and well-fitted drive avoids surprises during the passage.
If you need to confirm any detail, write to us. At Proasail.com, official distributor, we help you make sure the part fits your equipment.
Compatibility
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| Part type | Adaptive sailing: servo & access |
|---|
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









