Rear Horizontal Foil Bulb Connector Kit V2
WASZP · Part no. WZFRHBCCV2K · Proasail.com, official WASZP distributor
- Get it on Tuesday 24 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZFRHBCCV2K is already in the message.
Description
The Rear Horizontal Foil Bulb Connector Kit V2 is the top connector that mounts on top of the rear horizontal foil bulb. A foil is the submerged wing that lifts the hull out of the water when the boat is foiling.
It is supplied with three fixing screws of different outside diameter, to take up tolerance variation, and with a shim (adjustment shim) for a precise fit. The kit is needed to upgrade from the Push Pin system (version 1).
It has no numbered position in the exploded diagram.
Fitting and use
The three screw diameters take up the tolerances and the shim fine-tunes the fit on the bulb.
Compatibility
For the WASZP, for moving over from the Push Pin system (version 1). Check your version before you order.
Which boats it fits
| WASZP | Fits, but it is not drawn in the parts diagram | Spare parts WASZP |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | The connector, three fixing screws with different outside diameters and a shim. |
|---|---|
| Sold as | Sold as a kit. |
| Technical data | Part number WZFRHBCCV2K, made by WASZP. Version V2. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
Can I buy the connector screws separately?
Yes, in three sizes: Small (WZFRHBCS1, 7.8 mm head outer diameter), Standard (WZFRHBCS2, 8.2 mm) and Big (WZFRHBCS3, 8.5 mm). The size is stamped on the bottom of the screw thread.
Is the shim sold separately?
There is the Rear Horizontal Foil Bulb Shim 0.20mm (WZFRHBS20), a 0.20 mm shim that fits between the bulb and the rear vertical foil. Compare it with the fitted part before ordering.
Do I need this kit if my rudder has the Push Pin system?
This kit is required to upgrade from the Push Pin (Version 1).
Is it included in the bulb assembly?
Yes. The Rear Horizontal Foil Bulb Assembly (WZFRHBX) includes 1 WZFRHBCCV2K kit, plus the WZFRHB bulb, 1 WZFRHBBR bolt and 2 BO6x75SH bolts.
Downloads
Recommended products
More parts for this boat and similar parts









