Sikaflex 291 310 ml Cartridge, White
Part no. BR3000
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference BR3000 is already in the message.
Description
Sika makes Sikaflex 291; this is the 310 ml cartridge in white, for workshop jobs on the boat. Check Sika's technical data sheet before use. General-purpose workshop consumable; not assigned to a specific RS model.
Fitting and use
Preparation: clean, dry surfaces free of grease, wax, oil or dust. Application: pierce the cartridge membrane and cut the nozzle to suit the joint width. Apply with a gun, without trapping air bubbles. Ideal temperature of the substrate and sealant: between 15 and 25 °C. Finishing: do it while the film is forming. Sika recommends its Tooling Agent N. Painting: after the film has formed, following a compatibility test. Cleaning: uncured product with Sika Remover-208. Cured, by mechanical means only.
Compatibility
General-purpose consumable: suitable for any boat.
Specifications
| What's included | One 310 ml cartridge of Sikaflex 291 in white. |
|---|---|
| Sold as | Sold per unit (one 310 ml cartridge). |
| Reference | BR3000 |
| Format | 310 ml cartridge |
| Colour | White |
| Chemical base | One-component polyurethane |
| Curing | With atmospheric moisture |
| Uncured density | Approx. 1.3 kg/l (depending on colour) |
| Shore A hardness | Approx. 40 |
| Skin formation time | Approx. 60 min |
| Open time | Approx. 45 min |
| Shelf life | 12 months unopened, stored below 25 °C |
| Standards | Meets IMO requirements |
Frequently asked questions
Can I paint over Sikaflex 291?
Yes. It can be sanded and painted. It is best to paint once the film has formed. Do a test first, because a paint with low elasticity may crack at the joint.
Can it be used to bond methacrylate or polycarbonate?
No. Sika advises against use on plastics prone to stress cracking, such as Perspex or polycarbonate. It bonds well to fibreglass, wood and metals.
Does it withstand seawater?
Yes, it resists fresh water and seawater. With fuels and oils, it only withstands temporarily. With alcohol, solvents and concentrated acids, it is not resistant.
Downloads
Recommended products
Similar parts









