Sikaflex 291 70 ml Cartridge, Black
Part no. BR2060
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference BR2060 is already in the message.
Description
Sika makes Sikaflex 291; this is the 70 ml cartridge in black, for workshop jobs on the boat. Check Sika's technical data sheet before use. General-purpose workshop consumable; not assigned to a specific RS model.
Fitting and use
Preparation: clean, dry surfaces free of grease, oil and dust. Application temperature: between 10 °C and 40 °C; ideally between 15 °C and 25 °C. Finishing: smooth the joint within the skin-formation time; Sika recommends its Tooling Agent N. Painting: within the skin-formation time; afterwards, improve adhesion with Sika Aktivator-100 or -205. Cleaning: uncured, with Sika Remover-208; cured, mechanical means only. Before applying: test adhesion on the actual materials.
Compatibility
General-purpose consumable: suitable for any boat.
Specifications
| What's included | One 70 ml pack of black Sikaflex 291. |
|---|---|
| Sold as | Sold per unit. |
| Reference | BR2060 |
| Manufacturer | Sika |
| Chemical base | One-component polyurethane |
| Curing mechanism | With ambient humidity |
| Colour | Black |
| Format | 70 ml |
| Uncured density | 1.3 kg/l (depending on colour) |
| Application temperature | 10 to 40 °C |
| Skin formation time | 60 minutes (23 °C, 50 % RH) |
| Open time | 45 minutes (23 °C, 50 % RH) |
| Shore A hardness | 40 |
| Shelf life | 12 months, stored below 25 °C |
Frequently asked questions
Can I paint over Sikaflex 291?
Yes. According to Sika, paint within the skin-formation time. If a skin has already formed, apply a Sika activator first to improve adhesion. Always test the paint on a small area, as paints are less elastic than the sealant and may crack over the joint.
Can it be used to bond methacrylate or polycarbonate?
No. Sika states it must not be used on plastics prone to stress cracking, such as methacrylate or polycarbonate.
How long does it take to form a skin?
60 minutes at 23 °C and 50 % relative humidity. At lower temperature and humidity, curing is slower. Smooth the joint within that time.
Downloads
Recommended products
Similar parts









