Single cleat console for in-line seats, SKUD 18
Hansa · Part no. HAN-2291 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-2291 is already in the message.
Description
«Simplex» is its name, and it sums up its approach: a single handling point, no complications. It suits the arrangement in which the person on board sits on the boat's centreline and adjusts everything from there, without moving.
On the water, the layout is clear. The rotating cam cleats hold the mainsail, the jib and the spinnaker halyard. The clam cleats take care of the three main adjustments and the jib halyard tension. Everything is led back to the fitting, so the seated person always has it within reach.
Before ordering it, check that your boat has the arrangement it was designed for. As it is a fitting for a racing class, its use is governed by the class rules. If you have any doubts, contact us at Proasail.com and we will help you resolve them.
Fitting and use
Use: designed for one crew member on a central seat, on the boat's centerline. Control lines are led aft to the cleats.
Compatibility
Listed in the Hansa SKUD 18 parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | Console with rotating cam cleats for the mainsheet, jib sheet and spinnaker halyard. It also includes clam cleats for the three main controls and the jib halyard tension. |
|---|---|
| Sold as | Sold per unit |
| Boat | SKUD 18 |
| Version | Simplex, for in-line seating |
| Cam cleats | mainsheet, jib sheet and spinnaker halyard |
| Clam cleats | three main controls and jib halyard tension |
| Crew position | seat on the boat's centerline |
Frequently asked questions
Which seating layout is this console for?
For the SKUD 18 with in-line seating, with the crew member seated on the boat's centerline.
Which lines run through rotating cam cleats?
The mainsheet, jib sheet and spinnaker halyard.
Why is it called "simple"?
It is called "simplex" because of its simple layout: all control lines are led aft for a single crew member.
Recommended products
More parts for this boat and similar parts
-
-
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-
-
-
-
-
-
-
Hansa · Part no. HAN-4194.2
MkII lower shrouds, Access version, with adjusters, pair, SKUD 18
On order€317.02 €262.00









