Standard stand-mounted C Crane, 270 mm shaft
Hansa · Part no. HAN-5321 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-5321 is already in the message.
Description
The davit is used from the pontoon or floating pontoon, with the person or item beside the edge. The reel rope raises it and passes it to the boat. Depending on the rope length, lifting reaches up to 3 metres. It is useful on fixed shores and in areas with moderate tides. The manufacturer also recommends it for small boats, outboard (motor) or anchors.
To transfer a person, regulations require a fall-arrest line between the davit and the spreader bar or the person, as a secondary brake. Choose webbing long enough for the height of the manoeuvre. On a fixed pontoon with tides, that height changes. On a floating pontoon, it does not.
The whole assembly is stainless steel, which matters in constant humidity next to water. Even so, check the equipment before every manoeuvre.
Hansa also offers banana-type slings and seat harnesses separately for those with poor trunk stability. If you use a harness, always check that the centreboard locking pin is in place. That way the centreboard will not move if the boat heels.
Fitting and use
Installation: davit on an elevated mount bolted to a pontoon, walkway or pier
Lifting: up to 3 m, depending on the length of the line
Transferring people: use a fall arrest device with webbing suited to the height of the manoeuvre
With seat belt: check that the centreboard locking pin is in place
Compatibility
It is installed on pontoons, walkways and piers using its bolt-on mount, and Hansa fits it as standard on its modular pontoon systems. It is suitable for lifting ballasted centreboards and other loads of up to 120 kg (SWL).
Tell us your boat and we will check that this part fits.
Not sure it fits your boat? Write to us.
Specifications
| What's included | Crane with brake winch, fall arrest device, spreader bar and shackles. The slings and seat belts are Hansa accessories sold separately. |
|---|---|
| Sold as | Sold per unit. |
| Brand | Hansa Sailing |
| Model | C Crane, mounted version |
| Material | stainless steel |
| Shaft | 270 mm |
| Brake | drum winch with brake |
| Safe working load (SWL) | 120 kg |
| Testing | ISO/DIS 10535 |
| Maximum lift | up to 3 m depending on the length of the line |
Frequently asked questions
What weight can the crane take?
Its safe working load (SWL) is 120 kg, tested according to ISO/DIS 10535.
Can it be used to lift a ballasted centreboard?
Yes. Hansa also designed it to raise and lower ballasted centreboards. Check beforehand that the centreboard does not exceed 120 kg.
Do I need a fall arrest device to transfer a person?
Yes. Regulations require a fall arrest device as a secondary brake. Choose one with webbing long enough for the height of the manoeuvre.
Recommended products
More parts for this boat and similar parts
-
-
-
Hansa · Part no. HAN-5110
Vinyl hull stickers marking port and starboard on a Hansa
On order€6.05 €5.00 -
-
-
-
-
-
Hansa · Part no. HAN-5301
Stainless steel manual winch, also for keel lifters
On order€342.43 €283.00 -
Hansa · Part no. HAN-2343.3
Tool for fitting the composite car to the MkI track, Hansa
On order€58.08 €48.00









