Torx pan head screw M8 x 16
RS Sailing · Part no. FIX-B8-T16 · Proasail.com, official RS Sailing distributor
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference FIX-B8-T16 is already in the message.
Description
Metric screw with a pan head and Torx drive, nominal size M8 x 16. Part of the RS range used to secure fittings and components. It is fitted on the RS Cat 12.
Compatible with RS Cat 12.
Fitting and use
Use: fastening fittings during assembly of the RS Cat 12 (hull fittings stage). Tool: Torx-drive key. Tightening: do not overtighten. Check: verify that it is the correct fastener; do not confuse it with the M6 × 16 or M6 × 12 screws.
Compatibility
Listed in the RS Cat 12 parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One M8 × 16 Torx pan head screw. |
|---|---|
| Sold as | Sold per unit. |
| Brand | RS Sailing |
| Part number | FIX-B8-T16 |
| Original name | M8 x 16 Torx Pan |
| Thread | M8 |
| Length | 16 mm |
| Head | pan (dome) |
| Drive | Torx |
Frequently asked questions
Is it the same as the M6 × 16 screw in the kit?
No. RS's guide lists them as separate part numbers: this one is the M8 × 16 (FIX-B8-T16) and the other is the M6 × 16 (FIX-B6-C16). Check the size before installing.
What tool do I need?
A Torx-drive key. Confirm the size by trying the key on the head.
Can I tighten it fully?
It is not advisable. RS's build guide expressly warns against overtightening the hull fittings fasteners.
Recommended products
More parts for this boat and similar parts
-
-
-
-
RS Sailing · Part no. C16-HF-504
RS Quest / Cat 16 transom gudgeon backing plate, MK2 hull
On order€25.46 €21.04 -
-
-
-
RS Sailing · Part no. 404-101-05
Seldén BBB40 single block with becket and cam cleat
On order€168.60 €139.34 -
-









