Wand Control Link Assembly V1
WASZP · Part no. WZCWCAV1 · Proasail.com, official WASZP distributor
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZCWCAV1 is already in the message.
Description
The Wand Control Link Assembly V1 is the welded assembly of the wand control link and its slider (Wand Control Link & Slider Assembly V1 Welded, 2.5 mm). The wand is the sensor rod that touches the water and controls the ride height.
It is for use with the 2.5 mm pull rod. Related reference: WZCWPR (wand pull rod V1).
It is part of the WASZP control systems. It has no numbered position in the exploded diagram.
Fitting and use
Works with the 2.5 mm V1 wand pull rod, part number WZCWPR.
Compatibility
For the WASZP with the V1 wand system, with a 2.5 mm pull rod. Check your boat's version before you order.
Which boats it fits
| WASZP | Fits, but it is not drawn in the parts diagram | Spare parts WASZP |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | Control link and slider, joined in a welded assembly. |
|---|---|
| Technical data | Part number WZCWCAV1, made by WASZP. Version V1, welded. |
| Compatible pull rod | 2.5 mm. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
Can I fit it with the 3 mm V2 pull rod?
It is for the 2.5 mm rod, the Wand Pull Rod V1 (WZCWPR). For the 3 mm rod, Wand Pull Rod V2 (WZCWPRV2), the matching WASZP link is the Wand Control Link Assembly V2 (WZCWCAV2).
Which rear end goes with the same 2.5 mm rod?
For the 2.5 mm rod, it is the Wand Pull Rod Rear End V1 (WZCWPRRE), position 11 of the Wand Assembly (up to reversing lever).
Which control link is shown in the exploded diagram?
The Wand Assembly (up to reversing lever) diagram shows the V2 link at position 8 (part no. WZCWCA); the V1 has no numbered position. Compare with the one fitted on your boat before ordering.
Downloads
Recommended products
More parts for this boat and similar parts









