Wand Control Link Assembly V2
WASZP · Part no. WZCWCAV2 · Proasail.com, official WASZP distributor
- Get it on Tuesday 24 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZCWCAV2 is already in the message.
Description
The Wand Control Link Assembly V2 is the welded assembly of the wand control link and its slider (Wand Control Link and Slider Assembly V2 Welded, 3 mm). The wand is the sensor rod that touches the water and controls the ride height. It is listed as WZCWCA, position 8 of the Wand Assembly (up to reversing lever), 1 per boat.
It is for the 3 mm pull rod.
You will find position 8 of the Wand Assembly in the interactive exploded diagram.
Fitting and use
Works with the 3 mm V2 wand pull rod.
Compatibility
Listed in the WASZP parts diagram.
For the WASZP with the V2 wand system, with a 3 mm pull rod. Check your boat's version before you order.
Which boats it fits
| WASZP | Wand Assembly ( up to reversing lever ) pos. 8 · 1 per boat — See it in the parts diagram | Spare parts WASZP |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | Control link and slider, joined in a welded assembly. |
|---|---|
| Technical data | Part number WZCWCAV2 (WZCWCA), made by WASZP. Version V2, welded. |
| Compatible pull rod | 3 mm. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
Does it work with the 2.5 mm V1 pull rod?
It is for the 3 mm rod, the Wand Pull Rod V2 (WZCWPRV2). For the 2.5 mm rod, WASZP has the V1 link, Wand Control Link Assembly V1 (WZCWCAV1).
Which rear end goes with the 3 mm rod?
The Wand Pull Rod Rear End V2 (WZCWPRREV2), made for the 3 mm rod, which needs 1 BO3x8RHP screw (M3x8 mm, Phillips round head).
Does it include the slider casing?
The Wand Control Slider Casing (WZCWCSC) has its own reference: position 9 of the same diagram, 1 per boat.
Which rod version does the same diagram show?
The Wand Assembly (up to reversing lever) diagram shows this V2 link at position 8, but the 2.5 mm Wand Pull Rod V1 (WZCWPR) and its Rear End V1 (WZCWPRRE) at positions 10 and 11. Check which version you have before ordering.
Downloads
Recommended products
More parts for this boat and similar parts









