Forestay
Part no. 60134
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 60134 is already in the message.
Description
Weta forestay (Forestay), part no. 60134.
When stepping the mast, fit the shrouds and the forestay (or the furling jib). To tension it, run the line through the bow ring, back through the forestay ring, then pull down hard. When hoisting the jib, the halyard is tied to the head with a bowline and the jib is clipped onto the forestay as it goes up. With the Weta furling jib, this version replaces the forestay with the furling jib. The mast is stepped as usual and the furling jib acts as the forestay. With the self-tacking jib kit, the 5 mm forestay bridle goes in the bow hole.
Weta spare part, Miscellaneous section.
Fitting and use
To tension it, pass the line through the bow ring, bring it back through the forestay ring and pull down hard. Use a 5 mm cable tie for the forestay in the bow hole.
Compatibility
Listed in the Weta parts diagram.
For the Weta with the standard jib. If you fit the furling jib, it acts as the stay and the forestay is not used.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| Technical data | Part number 60134, made by Weta Marine. |
|---|---|
| Section | Miscellaneous. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Do I need it if I fit a furling jib?
No: with the furling jib, the jib itself acts as the forestay when the mast is stepped. The furling jib hardware is listed as 30510 (Jib - Dacron Furling - Hardware Only).
When is the forestay hooked to the mast?
After the shrouds, with the fittings facing down and the halyards not crossed. When raising the mast, hold the forestay in your lower hand.
How tight should it be?
With the mast up, run the line through the bow ring (10210) and the forestay ring and pull until the floats stop lifting. Finish with half hitches and about 30 mm of tail.
Does it come with the shrouds?
This part number is the forestay (Forestay). If you also need the shrouds, the range has the set 60130 (Set of Stays) and the single shroud 60132 (Sidestay).
Downloads
Recommended products
More parts for this boat and similar parts









