Hansa · Part no. HAN-3421
Hyde jib with window, Hansa 303W
Hansa · Part no. HAN-4641.21 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4641.21 is already in the message.
Description
This piece is the jib of the 303 Wide. It is especially appreciated at starts and upwind legs with heavy traffic: the transparent panel lets you look to the other side and anticipate crossings. Chris Symonds, a regular racer in the class, recommends it to avoid collisions.
With a headstay that has no shrouds and a furling drum, a single line is enough to hoist or reduce it. That simplifies maneuvers when the wind shifts mid-race. Its area on the 303 Wide is 1.4 m².
To set it up, Symonds' guide suggests keeping the luff tension of the headstay at the minimum in all conditions. Upwind, the car goes in the rear hole. Downwind, open it on the side opposite the mainsail. Mark the sheets with tape and you'll repeat the settings without second-guessing.
Before going out, check all the equipment and make sure that, once furled, it opens fully. At Proasail.com, the official distributor, we help you confirm that it fits your boat.
Fitting and use
Luff tension on the bow mast: minimum in all conditions
Jib car, upwind: rear hole
Sheets: mark them with tape as a setting reference
Downwind: sheet the jib out on the side opposite the mainsail
Sail area reduction: single pull line (303 Wide)
Before sailing: check that the furled sails open completely
Compatibility
Listed in the Hansa 303 parts diagram.
For the 303. For other versions of the 303 or other boat brands, please ask us.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One Hyde windowed jib for the Hansa 303W (manufacturer reference 4641.21). |
|---|---|
| Sold as | Sold per unit. |
| Manufacturer reference | 4641.21 |
| Boat model | Hansa 303 Wide (303W) |
| Boat manufacturer | Hansa Sailing Systems |
| Window | yes |
| Jib area of the 303 Wide | 1.4 m² |
Frequently asked questions
What is the window in the jib for?
It lets you see other boats through the sail. On the 303 it is recommended in large fleets to avoid collisions.
What is the jib area of the 303 Wide?
The 303 Wide jib is 1.4 m².
How is the jib reduced on the 303 Wide?
It is furled and let out with a single pull line. The bow mast incorporates the furling drum.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
-
Hansa · Part no. HAN-5432.2
Bow support for the Shore shuttle trolley, Hansa 303
On order€85.91 €71.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-









