Hansa · Part no. HAN-3421
Hyde sail set (mainsail and jib), Hansa 303 Breeze
Hansa · Part no. HAN-4642 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4642 is already in the message.
Description
This small keelboat sails with a schooner rig and self-supporting spars. The two sails in this pack are its engine: the mainsail and the jib work together and are handled with manual sheets.
On the water, the most practical thing is to decide how much sail to reduce before leaving. The mainsail is reefed by hand, and the jib is eased out and furled with a single hauling line. This way you can adapt to the wind without any fuss. Neither sail uses battens, so there is nothing to check or adjust.
The manufacturer's manual always asks you to adjust the reefing to the weather conditions. Check the forecast before setting sail and know in advance how far you will reduce if the wind picks up.
If you want to review the rigging or reefing, download the official 303 manual from this page. The chapter “How to Rig a 303 Breeze” explains it in detail.
Fitting and use
Mainsail reefing: manual
Jib reefing: with a single pull line
Handling: manual sheets for mainsail and jib
Rigging: 303 Breeze
Compatibility
Listed in the Hansa 303 parts diagram.
It is the model for reference 4642.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | Mainsail (4642.1) and jib (4642.2). Both with the Hansa emblem, country code and sail numbers already applied. |
|---|---|
| Sold as | Sold as a set: one mainsail and one jib. |
| Mainsail reference | 4642.1 |
| Jib reference | 4642.2 |
| Boat model | Hansa 303 Breeze |
| Mainsail area (boat's sail plan) | 4.4 m² |
| Mainsail reefing | down to 0.5 m² |
| Jib area (boat's sail plan) | 1.4 m² |
| Battens | none (mainsail and jib) |
| Boat rig | schooner with self-supporting spars |
| Customization | Hansa emblem, country code and sail numbers applied |
Frequently asked questions
Do the sails already have the sail numbers?
Yes. They include the Hansa emblem, country code and sail numbers applied.
What are the areas of the mainsail and the jib?
The 303 Breeze has 4.4 m² for the mainsail and 1.4 m² for the jib. Neither sail has battens.
Can I reduce sail in stronger wind?
Yes. The mainsail can be reefed by hand down to 0.5 m². The jib is handled with a single pull line.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
-
Hansa · Part no. HAN-5432.2
Bow support for the Shore shuttle trolley, Hansa 303
On order€85.91 €71.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-









