Hansa · Part no. HAN-3421
Hyde sail set (mainsail and jib), Liberty S
Hansa · Part no. HAN-4661 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4661 is already in the message.
Description
On the water, what you appreciate most is being able to change sail area without fuss. The mainsail measures 4.5 m², has no battens and reefs down to 0.5 m². The jib measures 1.75 m², is self-tacking and furls completely.
On the Liberty, each one is hoisted and lowered with a single control line. The spars have no stays and carry the reefing drum at the foot.
We recommend reefing according to the weather. If the wind is getting stronger, it is best to reef before setting out, not once you are already sailing. It is a simple rule that gives you margin and peace of mind on board.
If you have any questions about your Liberty S, write to us and we will guide you.
Fitting and use
On the Liberty, the mainsail is reefed and let out with a single hauling line. The jib works the same way, with its own line. Both spars are rigged without stays and have the reefing drum at the foot.
Compatibility
Listed in the Hansa Liberty parts diagram.
Which boats it fits
| Hansa Liberty | parts diagram · Whole boat — See it in the parts diagram |
|---|
Not sure it fits your boat? Write to us.
Specifications
| What's included | Mainsail and jib. Both include the Hansa emblem, country code and sail numbers already in place. |
|---|---|
| Sold as | Sold as a set: one mainsail and one jib. |
| Manufacturer | Hansa Sailing Systems |
| Boat model | Liberty S |
| Mainsail | 4.5 m², battenless |
| Mainsail reefing | down to 0.5 m² |
| Jib | 1.75 m², self-tacking |
| Jib reefing | fully furlable |
| Sail markings | Hansa emblem, country code and sail numbers |
Frequently asked questions
Do the sails already have the sail numbers?
Yes. They include the Hansa emblem, country code and sail numbers.
Can they be reduced in strong wind?
Yes. On the Liberty, the mainsail can be reefed down to 0.5 m² and the jib can be furled completely, each with a single line.
Does the mainsail have battens?
No. The mainsail is battenless.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
Hansa · Part no. HAN-6162.80
Liberty and 303S portable servo system: 80 rpm main and self-tacking jib
On order€4,178.13 €3,453.00 -
Hansa · Part no. HAN-6162.71
Liberty and 303S portable servo system: 70 rpm main and self-tacking jib, no battery
On order€3,079.45 €2,545.00 -
Hansa · Part no. HAN-6161.81
Liberty and 303S fixed servo system: 80 rpm main and self-tacking jib, no battery
On order€3,944.60 €3,260.00 -
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00









