Self-Tacking jib complete kit for Wētā
Part no. 30306
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 30306 is already in the message.
Description
Complete Weta self-tacking jib kit (Self Tacking Jib Complete Kit), part no. 30306.
The 2022 self-tacking jib kit lets you tack and gybe hands-free, especially combined with the Weta Twin Tiller kit.
Weta spare part, Sails section.
Fitting and use
You get more out of having your hands free if you combine it with the Weta twin tiller extension kit (Twin Tiller).
Compatibility
Which boats it fits
| Weta | Fits, but it is not drawn in the parts diagram |
|---|
Not sure it fits your boat? Write to us.
Specifications
| Sold as | Sold as a kit. |
|---|---|
| Technical data | Part number 30306, made by Weta Marine. |
| Section | Sails. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Which hull numbers is this kit for?
It is the "Self Tacking Jib Complete Kit (No Mold)". The kits with a hull number are 30305 (Wētā#1-999) and 30304 (Wētā#1000+): compare with your boat before ordering.
What do I need if my deck already has the moulded support?
The official kit guide explains that, on newer boats with the track support built into the deck mould, you only need to install the kit's rigging pack. That moulded support can also be used with the standard jib.
Which clew hole does the tension line go to?
Because of the cut of the self-tacking jib, the guide says to shackle the tension line to the second hole in the clew counting from the front; in stronger winds, to the first one.
How do I lead the jib sheets with the self-tacker?
The guide gives two methods: through one jib cleat moved to the centre of the front edge of the cockpit, with one end tied to the mast step bar; or through the gaps on each side and the jib cleats, across the boat to the edge of the opposite trampoline. With the second, the sheets are the same length on both tacks.
Downloads
Recommended products
More parts for this boat and similar parts









