Self-Tacking jib complete kit for Wētā #1-999
Part no. 30305
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 30305 is already in the message.
Description
Complete Weta self-tacking jib kit for Wētā#1-999 (Self Tacking Jib Complete Kit for Wētā#1-999 (White)), part no. 30305. It is for Wētā#1-999 and the colour is white (White).
The 2022 self-tacking jib kit consists of a deck-mounted track and a new, slightly smaller jib. It lets you tack and gybe hands-free, especially combined with the Weta Twin Tiller kit. Kit contents (Self Tacker Kit Contents):
- Track and supports (Track and Supports).
- Track car (Track Car).
- 1 shackle (1x Shackle).
- 1 saddle, a lacing eye (1x Saddle).
- 2 Ronstan Series 20 ball-bearing blocks RF25109 (2 X Ronstan Series 20 Ball Bearing Block RF25109).
- 3 m of 4 mm Dyneema (3m x4mm Dyneema).
- 1 m of 3 mm Dyneema (1m x3mm Dyneema).
- 2 m of 3 mm Dyneema-core rope, red (2m x 3mm Dyneema core (red)).
For the older boats there is a kit with the track and supports (which are glued to the deck), the sail, the blocks and the ropes. In step 1.3 of the fitting (For Weta #1-999), place the recessed moulding against the mast step, keeping the midpoint 25 mm from the mast. The curved track must face towards the bow. The installation requirements (Installation Requirements) include MSR structural adhesive. Use only flexible marine-grade structural adhesives: Sikaflex 292i, Fixtech Fix 190, 3M 5200 or Bostick Simpson MSR.
Weta spare part, Sails section.
Fitting and use
On older boats the track and its supports are bonded to the deck. The recessed moulding sits against the mast foot, with its midpoint 25 mm from the mast, and the curved track faces forward. Bond with a flexible marine structural adhesive.
Compatibility
Listed in the Weta parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | Track with its supports, track car, 1 shackle, 1 saddle, 2 Ronstan Series 20 RF25109 ball-bearing blocks, 3 m of 4 mm Dyneema, 1 m of 3 mm Dyneema and 2 m of red line with a 3 mm Dyneema core. |
|---|---|
| Sold as | Sold as a kit. |
| Technical data | Part number 30305, made by Weta Marine. |
| Colour | white (White). |
| Accepted adhesives | 3M 5200, Sikaflex 292i, Bostick Simpson MSR or Fixtech Fix 190. |
| Section | Sails. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Is this kit right for my hull number?
This is the kit for hulls 1 to 999 (Wētā#1-999). For hull 1000 or higher, the part number is 30304. Your hull number is also your sail number.
What fitting materials do I have to provide?
The official guide lists them under installation requirements, not under kit contents: flexible marine structural adhesive, denatured alcohol, a cloth, P100 sandpaper, a pencil, masking tape, 2 bar clamps, 4 small plywood blocks, a drill and bits, a box cutter, a Phillips screwdriver, a hot glue gun and silicone spray.
What do I clean the deck with before gluing the support?
With 100% denatured alcohol, after sanding with at least 100 grit paper. The guide says not to use acetone, because the resin of the fibreglass under the track pads turns "green" and loses adhesion, nor paint cleaners, which often contain oil-based additives.
Can I heave to with the self-tacking jib?
Not in the usual way. The guide suggests sheeting the jib in hard, letting the mainsail out fully and jamming the tiller so the boat turns to windward: the effect is almost the same and the Weta becomes a stable platform to rest or make adjustments.
Can I adjust the clew angle while racing?
The central line from the mast to the track car lets you adjust it on the water, but since this is not possible with the standard jib, the class rules in some regions may prevent it while racing. Check your fleet's rules.
Downloads
Recommended products
More parts for this boat and similar parts









