Jib - dacron furling - Hardware only
Part no. 30510
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 30510 is already in the message.
Description
Weta Dacron furling jib hardware, hardware only (Jib - Dacron Furling - Hardware Only), part no. 30510. It is the hardware only (Hardware Only).
The Dacron furling jib system is based on replacing the forestay with the furling jib and tensioning the rig as usual. The top swivel of the furler is shackled to the eye at the head of the jib. The swaged T-ball terminal is then lashed to the swivel. That length is set during the initial fitting to get the correct rig tension. The tack of the jib is attached to the lower drum of the furler. The D-shackle must sit at the other end of the drum. If the D-shackle is a tight fit, squeeze the drum fork in a vice so that the shackle sits loosely.
Over time the components stretch a little and rig tension is lost. You then need to tighten the lashing between the top swivel and the swaged T-ball terminal.
Weta spare part, Sails section.
Fitting and use
The top swivel is shackled to the head and the swaged T-ball is lashed to the swivel. The tack goes to the drum and the D-shackle to the other end. If the shackle only just goes in, close up the drum fork in a vice. Tension drops with use: re-tension the lashing between swivel and T-ball.
Compatibility
Listed in the Weta parts diagram.
For the Weta with the Dacron furling jib, which takes the place of the forestay.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| Sold as | Only the hardware is supplied (Hardware Only). |
|---|---|
| Technical data | Part number 30510, made by Weta Marine. |
| Section | Sails. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Does this part include the sail?
No: it is the hardware only (Hardware Only). The sail on its own is 30505 (Jib - Dacron Furling - Sail Only) and the kit with sail and hardware is 30500.
What happens to the forestay and the jib halyard?
The system replaces the forestay with the furling jib: the T-ball hooks into the mast as if it were the forestay and the mast is raised as normal. The jib halyard is not rigged; all other halyards go on as usual.
Do I have to adjust the top strop every time?
No. The first couple of times you rig, you need to fine-tune its length, because it stretches slightly, and that means raising and lowering the mast a couple of times. Once it is adjusted, you will not need to do it again.
Which parts exactly come in the pack?
The instructions name the top swivel, the bottom drum with its D-shackle and the swaged T-ball fitting. To get it right, compare the size and shape with the part fitted on your boat.
Downloads
Recommended products
More parts for this boat and similar parts









