Twin tiller extension kit (including 1 tiller extension)
Part no. 40281
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Proasail.com is the official Weta distributor.
Not sure it fits your boat? Write to us: the reference 40281 is already in the message.
Description
Weta twin tiller kit (Twin Tiller Kit), part no. 40281. Its full name is Twin Tiller Kit (Inc Tiller Ext and Universal) - NZ Stock: it includes the tiller extension and the universal joint. The kit improves boat handling: you let go of the active extension and, with one hand on the mainsheet, you have the other free to cross the boat and pick up the other extension.
The kit includes: One two-piece tiller extension with universal joint (1 x Two-piece tiller extension with universal joint). Two stainless steel rings (2 x Stainless steel rings). Two metres of 3 mm shock cord (2m 3mm shock cord). One round tiller adapter (1 x Round tiller adapter). Two 50 mm x 4 mm bolts with nuts (2 x 50mmx4mm bolts and nuts). Four round stoppers (4 x Round stoppers). One new tiller end plug (New tiller end plug). Two PVC elbows (2 x pvc elbows). Fitting it needs some tools, not included (Tools required).
The inner diameter of the tiller extension tube is 17 mm (The inner diameter of the tiller extension tube is 17mm). As an option, you can extend the tiller extensions to 2 metres so they reach beyond the edge of the trampoline (Extend the tiller extensions to 2 metres so they extend beyond the tramp edge).
Weta spare part, Foils section.
Fitting and use
When tacking, drop the extension you are holding, keep the mainsheet in one hand and grab the opposite one with the other as you cross. Optionally, lengthen them up to 2 m so they reach out beyond the edge of the trampoline.
Compatibility
Listed in the Weta parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | 1 tiller extension in two pieces with a universal joint, 2 stainless steel rings, 2 m of 3 mm shock cord, 1 round tiller adaptor, 2 bolts of 50 x 4 mm with nut, 4 round stoppers, 1 new tiller end cap and 2 PVC elbows. |
|---|---|
| Sold as | Sold as a kit. |
| Technical data | Part number 40281, made by Weta Marine. |
| Inner diameter of the extension tube | 17 mm. |
| Section | Foils. |
Product safety
- Manufacturer
- Wētā Marine · Campbells Bay, North Shore, Auckland, New Zealand · info@wetamarine.com
- EU responsible person
- PROASAIL, S.L. · Av. València, 82, 08430 La Roca del Vallès (Barcelona), Spain · info@proasail.com
Frequently asked questions
Does the kit include both tiller extensions?
It includes one: the name says it includes one extension (including 1 tiller extension) and the installation guide lists a two-piece extension with universal joint. Check before ordering. That extension on its own is 40280.
Does the kit include the self-tacking jib?
No. The self-tacking jib is ordered separately by hull number: 30304 for hull 1000 or higher and 30305 for hulls 1 to 999.
Which tools do I need to fit it?
The installation guide calls for a 4 mm spanner, mole grips or a plumber's wrench, long-nosed pliers, a Phillips screwdriver, a drill with a sharp bit, water-resistant adhesive/sealant, cloth-backed tape and 400 grit wet and dry paper; corrosion inhibitor gel is optional. Wear a mask when drilling carbon.
Does the tiller need drilling?
Yes. Offer up the adapter on the side of the tiller where the extension will not hit the cockpit sides when tacking, mark the holes and drill the carbon tiller right through, checking that they line up horizontally and vertically.
Can I race with two tiller extensions?
Yes: the class rules allow any number and length of extensions.
Downloads
Recommended products
More parts for this boat and similar parts









