Hansa · Part no. HAN-3421
North Sails jib, Hansa 303W
Hansa · Part no. HAN-4641.29 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4641.29 is already in the message.
Description
This sail occupies the bow position in a two-masted schooner rig, both self-supporting and without stays. It attaches to the foremast, which incorporates a reefing drum. It is the bow sail of the boat's original rig.
On the water, its advantage is that you can reduce sail without fuss when the wind picks up. It rolls in and out on the drum by pulling a single line, so you adjust its size from the thwart without going forward. Trimming is done with manual sheets, so you feel the sail's pressure in your hands and correct it instantly.
We recommend always reefing according to weather conditions. Do it before the wind builds, not when you're already over-canvassed. A well reduced sail in good time keeps the course steady, and the rig works under less load.
It is made by a workshop in Sri Lanka. At Proasail.com you can get it to keep your boat's original rig.
Fitting and use
Position: jib on the bow mast, which has the reefing drum
Furling: rolls and unrolls with a single furling line
Handling: manual sheets
Recommendation: reef sails according to weather conditions
Compatibility
Listed in the Hansa 303 parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | North Sails jib, part number 4641.29 for the Hansa 303W. |
|---|---|
| Sold as | Sold per unit. |
| Reference | 4641.29 – 303W Jib NORTH |
| Sail manufacturer | North Sails Sri Lanka, under license for Hansa Sailing Systems |
| Boat | Hansa 303 Wide |
| Jib area | 1.4 m² |
| Battens | battenless |
| Furling | fully furlable with a single line |
| Boat's bow mast | 2.85 m, unstayed, with reefing drum |
| Boat rig | schooner, with self-supporting masts |
Frequently asked questions
Which boat is this jib for?
It is the jib for the Hansa 303 Wide (303W).
Does it have battens?
No. On the boat, the jib is battenless.
Can it be reefed?
Yes. The jib is reefed and unreefed with a single furling line.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
-
Hansa · Part no. HAN-5432.2
Bow support for the Shore shuttle trolley, Hansa 303
On order€85.91 €71.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-









