Hansa · Part no. HAN-3421
North Sails mainsail, Hansa 303 Breeze
Hansa · Part no. HAN-4642.19 · Proasail.com, official Hansa distributor
- Made to order · about 3 months
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference HAN-4642.19 is already in the message.
Description
It is the mainsail of the boat's schooner rig, which has a self-supporting mast. It is made by the workshop in Sri Lanka under licence from the boat's manufacturer.
On the water, the sail area is adjusted to the day's conditions. We recommend always doing this. When the wind picks up, reduce the sail by taking a reef, done by hand, down to a minimum area. In a light breeze, set it in full, also by hand.
The manual sets a safety rule: do not leave the sheet jammed. It is a simple rule and it is worth following on every day sail.
For sail care, follow the instructions in the owner's manual, which is linked on this sheet. Check the sail before each day sail. At Proasail.com we help you confirm it is the one you need for your boat.
Fitting and use
Handling: the mainsail is reefed and set by hand. Area reduction: from 4.4 m² to 0.5 m² with a reef. Safety: we advise reefing sails according to the weather and not leaving the mainsheet locked off.
Compatibility
Listed in the Hansa 303 parts diagram.
Which boats it fits
Not sure it fits your boat? Write to us.
Specifications
| What's included | One mainsail with the Hansa emblem, country code and sail numbers already applied. |
|---|---|
| Sold as | Sold per unit. |
| Boat model | Hansa 303 Breeze |
| Mainsail area | 4.4 m² |
| Area with reef | down to 0.5 m² |
| Battens | none |
| Boat rig | schooner, with self-supporting masts |
| Manufacture | North Sails Sri Lanka, under license for Hansa Sailing Systems |
| Marking | Hansa emblem, country code and sail numbers |
Frequently asked questions
Does this mainsail have battens?
No. The 303 Breeze mainsail is of the battenless type.
What is its area and can it be reduced?
The mainsail is 4.4 m². With a reef, it can be reduced to 0.5 m².
Does it come with sail numbers?
Yes. It includes the Hansa emblem, country code and applied sail numbers.
Downloads
Recommended products
More parts for this boat and similar parts
-
On order€273.46 €226.00
-
-
-
Hansa · Part no. HAN-4726.2
Cockpit skirt hooks (8 pcs), Hansa 2.3, 303 and Liberty
On order€53.24 €44.00 -
Hansa · Part no. HAN-4746.2
Cockpit skirt hooks (10 pcs), Hansa 303 and Liberty
On order€67.76 €56.00 -
-
Hansa · Part no. HAN-5432.2
Bow support for the Shore shuttle trolley, Hansa 303
On order€85.91 €71.00 -
Hansa · Part no. HAN-6503
80 rpm mainsheet winch without clutch, Hansa 2.3S, 303S and Liberty S
On order€1,167.65 €965.00 -
-









