Wand Pull Rod Rear End V1
WASZP · Part no. WZCWPRRE · Proasail.com, official WASZP distributor
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZCWPRRE is already in the message.
Description
The Wand Pull Rod Rear End V1 is the rear end fitting of the WASZP wand pull rod, V1 version for the 2.5 mm rod. The wand is the sensor rod that touches the water and controls the ride height. In the exploded diagram it is position 11 of the Wand Assembly (up to reversing lever), 1 per boat.
It is for use with the 2.5 mm pull rod. Related reference: WZCWPR (wand pull rod V1).
You will find position 11 of the Wand Assembly in the interactive exploded diagram.
Fitting and use
Fits on the V1 wand pull rod, part number WZCWPR.
Compatibility
Listed in the WASZP parts diagram.
For the WASZP with the V1 wand system, with a 2.5 mm rod. Check your boat's version before you order.
Which boats it fits
| WASZP | Wand Assembly ( up to reversing lever ) pos. 11 · 1 per boat — See it in the parts diagram | Spare parts WASZP |
|---|
Not sure it fits your boat? Write to us.
Specifications
| Technical data | Part number WZCWPRRE, made by WASZP. Version V1. |
|---|---|
| Compatible rod | 2.5 mm. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
Does it fit the 3 mm V2 pull rod?
It is for the 2.5 mm rod, the Wand Pull Rod V1 (WZCWPR). For the 3 mm rod, WASZP has the Wand Pull Rod Rear End V2 (WZCWPRREV2).
Does it need a screw to fit it?
The official V1 list shows no fasteners. The V2 list (WZCWPRREV2) does specify 1 BO3x8RHP screw (M3x8 mm); check it in the Wand Assembly (up to reversing lever) diagram before ordering.
Is it the same as the hull push rod rear end?
No. The Hull Push Rod - Rear End (WZCPRRE) is a different reference, position 6 of the Control Assembly. This end is position 11 of the Wand Assembly (up to reversing lever).
Downloads
Recommended products
More parts for this boat and similar parts









