Wand Pull Rod V1
WASZP · Part no. WZCWPR · Proasail.com, official WASZP distributor
- On order: get it around Thursday 3 if you order today
- Free pickup in La Roca del Vallès · Mon-Fri 9:00-16:00
- Secure card payment · Visa, Mastercard, Maestro
- Returns within 14 days · Shipping and returns
Not sure it fits your boat? Write to us: the reference WZCWPR is already in the message.
Description
The Wand Pull Rod V1 is the pull rod of the WASZP wand, V1 version, 2.5 mm x 95 cm. The wand is the sensor rod that touches the water and controls the ride height. In the exploded diagram it is position 10 of the Wand Assembly (up to reversing lever), 1 per boat.
Related reference: WZCWPRRE (rear end of the wand pull rod V1).
You will find position 10 of the Wand Assembly in the interactive exploded diagram.
Fitting and use
Its rear end fitting is part number WZCWPRRE.
Compatibility
Listed in the WASZP parts diagram.
For the WASZP with the 2.5 mm V1 wand system. Check your boat's version before you order.
Which boats it fits
| WASZP | Wand Assembly ( up to reversing lever ) pos. 10 · 1 per boat — See it in the parts diagram | Spare parts WASZP |
|---|
Not sure it fits your boat? Write to us.
Specifications
| Technical data | Part number WZCWPR, made by WASZP. Version V1. |
|---|---|
| Dimensions | 2.5 mm x 95 cm. |
Product safety
- Manufacturer
- KA Sail / WASZP · Unit 11, 91-95 Tulip Street, Cheltenham, Victoria 3192, Australia · office@kasail.com · sales@waszp.com
- EU responsible person
- KINGSTON RANGE PTY LTD · Via di Mezzo 9, Località Navene, 37018 Malcesine (VR), Italy · alison@kasail.com
Frequently asked questions
How does it differ from the Wand Pull Rod V2?
In size: the V1 is 2.5 mm x 95 cm and the V2 (WZCWPRV2) is 3 mm x 94.2 cm. Before ordering, measure the diameter of the one fitted on your boat.
Does it come with the control link or the rear end?
No. For the same 2.5 mm rod, the V1 link (WZCWCAV1) and the Wand Pull Rod Rear End V1 (WZCWPRRE), position 11 of the diagram, are the ones specified.
Does it work with the V2 link at position 8 of the diagram?
The V2 link (WZCWCAV2; code WZCWCA) is specified for the 3 mm rod. If your boat has it, measure the diameter of your rod (2.5 or 3 mm) before ordering.
Downloads
Recommended products
More parts for this boat and similar parts









